Von Lucas, Gründer von FixMyVideos · Aktualisiert am
10-bit 4:2:2 Video Won't Play? The File Is Probably Fine
You shot in your camera's best quality mode, copied the clip to your computer, and nothing will play it. Windows shows an error code, QuickTime refuses it, your phone shows a black frame. The camera plays it back without trouble, which makes it look like the copy broke the file.
Very often it did not. Many cameras, Sony bodies among the most common, record 4K in H.264 at 10 bits with 4:2:2 colour, and almost no consumer player can decode that particular combination. The file is complete and every picture in it is intact. What is missing is a decoder on your side.
What 10-bit 4:2:2 means, and why players refuse it
Two settings describe how the camera stores colour:
- Bit depth. 8-bit gives 256 levels per channel, 10-bit gives 1024. The extra levels are what keep skies smooth and give a log profile room to be graded.
- Chroma subsampling. A picture is stored as brightness plus colour. 4:2:0 keeps one colour sample for every block of four pixels; 4:2:2 keeps twice as many, which helps keying and heavy grading.
Phones, browsers, Windows and macOS are built around one H.264 shape: 8-bit 4:2:0. That is what streaming services, phones and most downloads use, and it is what the hardware decoders in computers and phones are made for. H.264 in 10-bit 4:2:2 is a professional profile (ffmpeg names it "High 4:2:2") that these players do not handle. They do not say "unsupported profile". They show a generic playback error, a black window, or nothing at all, which looks exactly like a damaged file.
HEVC (H.265) is a different case: 10-bit 4:2:0 HEVC is something modern phones and computers usually play. Its 4:2:2 version is less widely supported, and our page on HEVC that will not decode on a Mac covers that side.
Two minutes to check your file
-
Open it in VLC. VLC is free and carries its own decoders, so it does not depend on what your system supports. If VLC plays the clip, the file is not damaged. At 4K it may stutter on an older computer, since it decodes in software, but the pictures are there.
-
Read the format. In VLC, Tools > Codec Information. Or install the free MediaInfo and open the file: look for
Chroma subsampling: 4:2:2andBit depth: 10 bits, with a format profile starting withHigh 4:2:2. From a terminal:ffprobe -v error -select_streams v:0 -show_entries stream=profile,pix_fmt -of default=nw=1 C0001.MP4profile=High 4:2:2withpix_fmt=yuv422p10leis this case. -
Compare with another clip from the same camera. If clips you recorded in an 8-bit 4:2:0 mode play everywhere and the 10-bit 4:2:2 ones do not, you have your answer.
If VLC also refuses the file, or ffprobe answers with an error instead of a profile, this page is not your problem: the file is likely damaged. Start with error 0xc00d36c4 or moov atom not found, and for Sony cameras recovering an XAVC S file.
The free fixes
Keep watching in VLC. Nothing about the file needs changing to view it.
Edit it as it is. Editing software is where this format is meant to go. The refusals come from the players built into the operating system, phones and browsers.
Make a playable copy. HandBrake (free) does it with a few clicks: H.264, 8-bit, 4:2:0 is its default output. With ffmpeg:
ffmpeg -i C0001.MP4 -c:v libx264 -preset slow -crf 18 -pix_fmt yuv420p -c:a aac -b:a 192k -movflags +faststart C0001_play.mp4
-pix_fmt yuv420p is the part that matters: without it, ffmpeg keeps the 10-bit 4:2:2 format and the copy fails in the same places. The audio line converts the camera's PCM sound to AAC, which every player reads. Do not add a -level 4.2 you found in an old guide: that level is too low for 4K, and a strict hardware decoder refuses a 4K stream that claims it. Leave the level out and the encoder picks one that fits.
Keep the original. The copy is 8-bit 4:2:0, so it has lost the colour headroom you shot 10-bit 4:2:2 for. Use the copy for watching and sharing, and the original for grading.
For next time, if you do not grade your footage, the camera's movie menu lists recording formats with their bit depth and subsampling. An 8-bit 4:2:0 format plays everywhere straight off the card.
What we measured on a real clip
A short Sony 4K clip came to us as "broken" after Windows refused to play it. It was not damaged: its index was exact and all 150 of its pictures decoded with ffmpeg in strict mode without a single error message. The stream was H.264 High 4:2:2 at 10 bits.
Our own analysis got it wrong at first. Because the clip was Sony XAVC S, it asked for a reference clip from the same camera, which is the right request for a file that lost its decoder settings and a useless one for a file that never lost anything. We fixed that. The engine now decodes one second at the start, the middle and the end of a file whose index is intact, requires a completely silent decode, and only then checks the result against a list of formats consumer players are known to handle (for H.264, 8-bit 4:2:0 only; for HEVC, 4:2:0 in 8 or 10 bits). A file that passes the decode but sits outside that list is reported as not damaged, in a format your player cannot decode, with the format named in words.
What it delivers is a converted copy, measured on that clip:
- H.264 High, 8-bit 4:2:0, at the 4K level the encoder chose (5.1), 150 pictures out of 150, 5.005 seconds.
- A strict decode of the copy finishes with no error output at all.
- Picture fidelity against the original, compared at the same colour layout: 44.3 dB PSNR on brightness, which is visually identical. The frame we compared by eye matched; the flat look was the recording's own picture profile.
- Sound converted from PCM to AAC and measured against the original by cross-correlation: 0 ms of offset.
- The copy came out at roughly a quarter of the original's size.
That conversion is the same thing HandBrake or the command above does. We measured it with ffmpeg, which reads both files; the shape it produces (8-bit 4:2:0 H.264) is the one consumer players are built for.
When paying makes no sense
If VLC plays the file, it is not damaged and nobody needs to repair it, us included. A free conversion gives you a copy that plays. Upload it here only if you would rather not install anything: the analysis will tell you it is intact and name the format, and the preview shows the converted footage.
If VLC does not play it, the file has a different problem, and the analysis is free either way.
Uploading your file
Upload the clip, up to 150 GB. The analysis says whether the file is damaged or simply in a format your player cannot decode, and you get a free 5-second preview from your own footage. You pay only once the preview shows your footage: €6 under 2 GB, €18 from 2 to 20 GB, €35 from 20 to 50 GB and €59 above that, VAT included. Uploads are deleted automatically after 48 hours.
FAQ
My Sony 4K clips play on the camera but not on my PC. Is the card failing? Not if VLC plays them. The camera has a hardware decoder for its own recording format; your PC's built-in player does not. A failing card produces files that VLC also struggles with, often with a blank duration.
Will installing HEVC Video Extensions fix it? Not for H.264 4:2:2. That extension adds HEVC decoding to Windows. Check the codec name in VLC first: if it says H.264 (or AVC) with 4:2:2 at 10 bits, convert a copy instead.
Does converting lose quality? Some, by design. The copy keeps the resolution and frame rate and looks the same on screen, but it is 8-bit 4:2:0, so it has less room for grading. Keep the original file.
Why does it play in my editor but not in the Windows player? Editing software includes decoders for professional formats. The players built into Windows, macOS, phones and browsers mostly do not.
Can a 10-bit 4:2:2 file also be damaged? Yes. If VLC refuses it, ffprobe reports an error, or the clip ends early, the file has a real problem and the format is a separate question. Our XAVC S recovery page covers the damage Sony files usually come with.
What happens to my file after upload? It is used only to analyse and repair your file, and it is deleted automatically after 48 hours. The details are on the privacy page.
Related
- Error 0xc00d36c4 on Windows
- Recover a Sony XAVC S file
- Black screen when playing a video
- Cannot decode H.265 on a Mac
- DaVinci Resolve cannot decode media
Kostenlose Vorschau · Unverbindlich
Sind Sie bereit, Ihr Video wiederherzustellen?
Laden Sie Ihre Datei hoch. In etwa einer Minute erhalten Sie kostenlos eine 5-Sekunden-Vorschau. Sie zahlen nur, wenn die Vorschau in Ordnung aussieht.
Ihre Datei hochladen →